回首頁
系所簡介
系所成員
師生園地
招生資訊
公佈欄
系友會
相關網站

 
系 上師資  

黃炯憲 教授

黃炯憲 教授

最高學歷: 美國俄亥俄州立大學 工程力學 博士

研究專長:振動學、系統識別、計算固體力 學、微動量測與分析、地震工程

教授課目:工程數學、微動量測與分析、材 料力學、結構學、工程材料、
應用力學、高等材料力學

辨公室:工程二館213室

電話:(03)5712121 ext 54962

電子信箱:cshuang@mail.nctu.edu.tw

經歷:

2013/ 1 至 2016/ 1 交通大學工學院 特聘教授
1998 / 7  至2000 / 7 國家地震工程研 究中心研究員
1992 / 6  至1998 / 6 國家地震工程研究中心副研究員
1991/ 7   至1992 /4  美國俄亥俄州立大學土木工程系博士後研究


參與計畫:

應用多重輸入/多重輸出模式識別結構系 統特性NSC89-2711-3-319-200-04 國科會 88,7-89,12
加勁鋼管混凝土構材受軸力行為之數值分析
NSC89-2711-3-319-200-37
國科會 88,7-89,12
微動量測分析工具探討(二)
NSC88-2711-3-319-200
國科會 87,7-88,6
平面變曲率梁承受移動載重之動力分析
NSC88-2211-E-032-015
國科會 87,7-88,6
加勁鋼管混凝土構材之強度與韌性行為探討(一) 國家地工程研究中心研究計劃 87,7-88,6
微動量測分析工具探討(一) 國家地工程研究中心研究計劃 86,7-87,6
變曲率變斷面曲梁面外動力分析
NSC 87-2211-E-032-015
國科會 86,7-87,6
壓電材料迴轉體與楔形板幾何引致電彈奇異性之探討 國科會 100,7-102,6
應用Ritz 法求解具內部裂縫板振動之探討 國科會 97,8-100,10
智慧型無線感測監控系統平臺建構與其在土木結構診斷應用之研究- 子計畫:無線感測於微動量測之應用及系統識別技術開發 國科會 101,8-102,7
以子結構之 TVARX 模式進行建築物之破壞診斷 國科會 101,8-102,7

個人著作

*: corresponding author
期刊論文
  1. O. G. McGee*, A. W. Leissa, and C. S. Huang, 1992, “Vibrations of cantilevered skewed plates with corner stress singularities”, International Journal of Numerical Methods in Engineering, 35(2), pp.409-424. (EI, SCI)
  2. O. G. McGee*, A. W. Leissa, and C. S. Huang, 1992, “Vibrations of cantilevered skewed trapezoidal and triangular plates with corner stress singularities”, International Journal of Mechanical Science, 34(1), pp.63-84. (EI, SCI)
  3. T. H. Wu*, B. W. Randolph, and C. S. Huang, 1993, “Stability of shale embankments “, Journal of the Geotechnical Engineering Division, ASCE, 119(1), pp127-146. (EI, SCI)
  4. A. W. Leissa*, O. G. McGee, and C. S. Huang, 1993, “Vibrations of sectorial plates having corner stress singularities”, Journal of Applied Mechanics, 60(1), pp. 134-140. (EI, SCI)
  5. A. W. Leissa*, O. G. McGee, and C. S. Huang, 1993, “Vibrations of circular plates having V-notches or sharp radial cracks”, Journal of Sound and Vibration, 161(2), pp. 227-239. (EI, SCI)
  6. C. S. Huang, A. W. Leissa*, and O. G. McGee, 1993, “Exact analytical solutions for the vibrations of sectorial plates with simply supported radial edges”, Journal of Applied Mechanics, 60(2), pp.478-483. (EI, SCI)
  7. C. S. Huang, O. G. McGee*, and A. W. Leissa, 1994, “Exact analytical solutions for the vibrations of mindlin sectorial plates with simply radial edges”, International Journal of Solids and Structures, 31(11), pp.1609-1631. (EI, SCI)
  8. O. G. McGee*, C. S. Huang, and A. W. Leissa, 1994, “Influence of corner stress singularities and nonstructural mass on the vibrations of cantilevered skewed trapezoidal plates”, Computer and Structure, 53(3), pp. 667-677. (EI, SCI)
  9. O. G. McGee*, A. W. Leissa, C. S. Huang, and J. W. Kim, 1995, “Vibrations of circular plates with clamped v-notches or rigidly constrained radial cracks”, Journal of Sound and Vibration, 181(2), pp. 185-201. (EI, SCI)
  10. O. G. McGee*, C. S. Huang, and A. W. Leissa, 1995, ”Comprehensive exact solutions for free vibrations of thick annular sectorial plates with simply supported radial edges”, International Journal of Mechanical Science, 37(5), pp.537-566. (EI, SCI)
  11. C. S. Huang, O. G. McGee*, A. W. Leissa, and J. W. Kim, 1995, “Accurate vibrations of simply supported rhombic plates by considering stress singularities”, ASME Journal of Vibration and Acoustics, 117(3), pp.245-251. (EI, SCI)
  12. 盧煉元*, 黃炯憲, 葉錦勳, 1996,”從實測地震資料識別不含土壤效應之樓房結構系統”, 結構工程, 11(3), pp.85-98.
  13. C. S. Huang*, T. J. Teng, and A. W. Leissa, 1996,”An accurate solution for the in-plane transient responses of a circular arch”, Journal of Sound and Vibration, 196(5), pp.595-609. (EI, SCI)
  14. Y. P. Tseng, C. S. Huang*, and C. J. Lin, 1997, “Dynamic stiffness analysis for in-plane vibrations of arches with variable curvature”, Journal of Sound and Vibration, 207(1), pp.15-31.(EI, SCI) (NSC-86-2211-E-032-005)
  15. C. S. Huang*, Y. P. Tseng, and S. H. Chang, 1997, “An analytical solution for out-of-plane vibrations of an arch with variable curvature”, The Chinese Journal of Mechanics, 14 (3), pp. 349-361. (NSC 87-2211-E-032-015)
  16. C. S. Huang*, Y. P. Tseng, and C. J. Lin, 1998, “In-plane transient responses of an arch with variable curvature using the dynamic stiffness method with numerical Laplace transform”, Journal of Engineering Mechanics, ASCE, 124(8), pp.826-835. (EI, SCI) (NSC-86-2211-E-032-005)
  17. 黃炯憲*, 蔡益超, 葉錦勳, 1998, “隨機遞減法在建築物微振時間域系統參數識別之應用” , 中國土木水利工 程學刊, 10(3), pp.537-547. (NSC-86-2211-E-032-005)
  18. C. S. Huang*, Y. P. Tseng, A. W. Leissa, and K. Y. Nieh, 1998, “An exact solution for in-plane vibration of an arch with variable curvature and cross-section”, International Journal of Mechanical Science, 40(11), pp.1159-1173. (EI, SCI) (NSC 87-2211-E-032-015)
  19. C. S. Huang*, Y. P. Tseng, and S. H. Chang, 1998, “Out-of-plane dynamic responses of noncircular beams by numerical Laplace transform”, Journal of Sound and Vibration, 215(3), pp. 407-424. (EI, SCI) (NSC 87-2211-E-032-015)
  20. 黃炯憲*,曾一平,張書豪,1998,”變斷面變曲率拱受多支承運 動之隨機面外分析”, 中國土木水利工程學刊, 10(4). (NSC 87-2211-E-032-015)
  21. 鍾立來*,鄧崇任,黃炯憲,柴駿甫,劉季宇,廖文義,1998,” 嘉義瑞里地震震災之探討”, 土木工程技術,2(4), pp. 117-133.
  22. 黃炯憲*,1999,”結構物之地震反應監測系統簡介”, 土 木技術,14(4) ,pp. 42-50.
  23. C. S. Huang*, C. H. Yeh, 1999, “Some properties of randomdec signatures”, Mechanical Systems and Signal Processing, 13(3), pp.491-507. (EI, SCI) (NSC 87-2711-3-319-200)
  24. C. S. Huang*, Y. B. Yang, L. Y. Lu, and C. H. Chen, 1999, “Dynamic testing and system identification of a multi-span highway bridge’, Earthquake Engineering and Structural Dynamics, 28, pp. 857-878. (EI, SCI)
  25. C. S. Huang*, Y. P. Tseng, S. H. Chang, and C. L. Hung, 2000, “Out-of-plane dynamic analysis of beams with arbitrarily varying curvature and cross-section by dynamic stiffness matrix method”, International Journal of Solids and Structures, 37, pp.495-513. (EI, SCI) (NSC 87-2211-E-032-015)
  26. C. S. Huang*, Y. P. Tseng, and C. L. Hung, 2000, “An accurate solution for the responses of circular curved beams subjected to a moving load,” International Journal for Numerical Methods in Engineering, 48, pp. 1723-1740. (EI, SCI) (NSC 88-2211-E-032-015)
  27. Y. P. Tseng*, C. S. Huang, and M. S. Kao, 2000, “In-plane vibration of laminated curved beams with variable curvature by dynamic stiffness analysis”, Composite Structures, 50(2), pp. 103-114. (EI, SCI)
  28. 鍾立來*、盧煉元、吳賴雲、葉錦勳、黃炯憲、黃國雲、蕭三 郎,2000,” 結構強迫振動系統識別之理論分析與試驗”, 結構工程,15(2), pp.71-90.
  29. 黃炯憲*、曾一平、洪建龍,2000,”非圓形曲梁承受移動載重之 反應”, 中國土木水利工程學刊, 12(3), pp.641-648. (NSC 88-2211-E-032-015)
  30. C. S. Huang*, 2001, “Structural identification from ambient vibration measurement using the multivariate AR model”, Journal of Sound and Vibration, 241(3), pp. 337-359. (EI, SCI) (NSC88-2711-3-319-200-06)
  31. C. S. Huang* and H. L. Lin, 2001, “Modal identification of structures from ambient vibration, free vibration, and seismic response data via a subspace approach”, Earthquake Engineering and Structural Dynamics, 30, pp.1857-1878 (EI, SCI) (NSC89-2211-E009-094)
  32. 翁元滔*、王勝輝、黃炯憲、葉勇凱、劉季宇、蔡克銓,2001,” 箍筋式加勁鋼管混凝土柱受軸壓行為之探討”, 結構工程,16(4) ,pp.51-65. (NSC88-2711-3-319)
  33. 陳振華*、黃炯憲、黃嘉東,2001,”次空間法於火力發電廠煙囪 之模態分析”, 結構工程,16(4), pp.99-117.
  34. C. H. Yeh*, L. Y. Lu, L. L. Chung, andC. S. Huang, 2001, “Test of a full-scale steel frame with TADAS”, Earthquake Engineering and Engineering Seismology, 3(2), pp. 1-16.
  35. C. S. Huang*, Y.-K. Yeh, G.-Y. Liu, H. T. Hu, K. C. Tsai, Y. T. Weng, S. H. Wang. M. C. Wu, 2002, “Axial load behavior of stiffened concrete-filled steel columns”, Journal of Structural Engineering, ASCE, 128(9), pp.1222-1230. (EI, SCI) (NSC88-2711-3-319, NSC89-2711-3-319-200-37)
  36. C. S. Huang*, 2002, “Corner singularities in bi-material Mindlin plates”, Composite Structures, 56, pp.315-327. (EI, SCI) (NSC90-2211-E-009-035)
  37. C. S. Huang*, 2002, “On the singularity induced by boundary conditions in a third-order thick plate theory”, Journal of Applied Mechanics, ASME , 69, pp. 800-810. (EI, SCI) (NSC90-2211-E-009-035)
  38. C. S. Huang*, S. L. Hung, C. M. Wen, and T. T. Tu, 2003, “A neural network approach for structural identification and diagnosis of a building from seismic response data”, Earthquake Engineering and Structural Dynamics, 32(2), pp.173-185. (EI, SCI) (NSC90-2211-E009-031)
  39. K. Y. Nieh,C. S. Huang*, and Y. P. Tseng, 2003, “An analytical solution for in-plane free vibration and stability of loaded elliptic arches”, Computers & Structures, 81(13), PP.1311-1327. (EI, SCI) (NSC90-2211-E-009-035)
  40. S. L. Hung*, C. S. Huang, C. M. Wen, and Y.C. Hsu, 2003, “Nonparametric identification of a building structure from experimental data using wavelet neural network,” Computer-Aided Civil and Infrastructure Engineering, 18, pp. 358-370. (EI, SCI) (NSC90-2211-E-009-031)
  41. C. S. Huang*, 2003, “Stress singularities at angular corners in first-order shear deformation plate theory”, International Journal of Mechanical Science 45(1), pp.1-20. (EI, SCI) (NSC91-2211-E-009-039)
  42. H. T. Hu*, C. S. Huang, M. H. Wu, and Y. M. Wu, 2003, “Nonlinear analysis of concrete-filled tube columns subjected to axial compressive force”, Journal of Structural Engineering, ASCE, 129(10), pp. 1322-1329 (EI, SCI) (NSC89-2711-3-319-200-37)
  43. C. S. Huang*, M. C. Yang, and K. Y. Nieh, 2003, “In-plane free vibration and stability of loaded and shear deformable circular arches”, International Journal of Solids and Structures, 40(22), pp. 5865-5886. (EI, SCI) (NSC90-2211-E-009-035)
  44. 陳振華*、黃炯憲、楊永斌,2003,”高速公路高架橋梁之微動量 測與分析”, 結構工程 ,18(2),pp.30-48。
  45. C. S. Huang* and K. H. Ho, 2004, “An analytical solution for vibrations of a polarly orthotropic Mindlin sectorial plate with simply-supported radial edges”, Journal of Sound and Vibration, 273(2), pp.277-294. (EI, SCI) (NSC91-2211-E-009-039)
  46. C. S. Huang*, 2004, “Corner stress singularities in a high-order plate theory”, Computers & Structures, 82(20-21), pp.1657-1669. (EI, SCI) (NSC91-2211-E-009-039)
  47. C. S. Huang*, A. W. Leissa, M. J. Chang, 2005, “Vibrations of skewed cantilevered triangular, trapezoidal and parallelogram Mindlin plates with considering corner stress singularities”, International Journal for Numerical Methods in Engineering, 62(13), pp.1789-1806. (EI, SCI) (NSC92-2211-E-009-043)
  48. H. T. Hu*, C. S. Huang, Z. L. Chen, 2005, “Finite element analysis of CFT columns subjected to combined axial compressive force and moment”, Journal of Constructional Steel Research, 61(12), pp1692-1712. (EI, SCI) (NSC 90-2625-Z-006-007)
  49. C. S. Huang*, S. L. Hung, C. I. Lin and W. C. Su, 2005, “A wavelet-based approach to identifying structural modal parameters from seismic response and free vibration data”, Computer-Aided Civil and Infrastructure Engineering, 20, pp.408-423 (EI, SCI) (NSC93-2625-Z-009-006)
  50. 蔡英宏、黃炯憲*、劉俊秀、尹衍樑、林俊昌,2005,” 國家奈米元件實驗室之微動量測與分析” ,結構工程,20(3),pp73-97(NSC92-2622- E-009-025-CC3)
  51. C. S. Huang*, 2006, “Analysis of stress singularities at bi-material corners in Reddy’s theory of plate bending”, Journal of Mechanics, 22(1), pp.67-75 (EI, SCI) (NSC93-2211-E-009-009)
  52. C. S. Huang*, A. W. Leissa, M. J. Chang, 2006, “Vibrations of Mindlin scetorial plates via the Ritz method considering stress singularities”, Journal of Vibration and Control, 12, pp.635-657(EI, SCI) (NSC93-2211-E-009-009)
  53. C. M. Lai, S. L. Hung*, C. S. Huang, J. C. Jan, 2007, “Unsupervised fuzzy neural networks for damage detection of structures” , Structural Control and Health Monitoring, 14, pp. 144-161(SCI, EI)
  54. C. S. Huang* and A. W. Leissa, 2007, “Three-dimensional sharp corner displacement functions for bodies of revolution”, Journal of Applied Mechanics, ASME, 74(1), pp. 41-46.
  55. C. S. Huang*, W. C. Su, 2007, “Identification of modal parameters of a time invariant linear system by continuous wavelet transformation”, Mechanical Systems and Signal Processing, 21 (4), pp. 1642-1664. (EI, SCI) (NSC92-2211-E-009-043)
  56. C. S. Huang*, M. J. Chang, 2007, “Corner stress singularities in a FGM thin plate”, International Journal of Solids and Structures, 44(9), pp. 2802-2819 (EI, SCI) (NSC94-2211-E-009-011)
  57. A. W. Leissa, C. S. Huang*, M. J. Chang, 2007, “Accurate frequencies and mode shapes for moderately thick, cantilevered, skew plates”, International Journal of Structural Stability and Dynamics, 7(3), pp.425-440(SCI, EI) (NSC93-2211-E-009-009)
  58. C. S. Huang* and A. W. Leissa, 2008, “Stress singularities in bimaterial bodies of revolution”, Composite Structures, 82, pp. 488-498 (EI, SCI)
  59. C. S. Huang*, A. W. Leissa and S. C. Liao, 2008, “Vibration analysis of rectangular plates with edge V-notches“, International Journal of Mechanical Science, 50, pp. 1255-1262. (EI, SCI)
  60. 陳振華*、黃炯憲、蘇威智、歐嘉宜,2009,”連續小波轉換於斜 張橋之模態分析”, 結構工程 ,24(1),pp109-124.
  61. C. S. Huang* and M. J. Chang, 2009, “Geometrically induced stress singularities of a thick FGM plate based on the third-order shear deformation theory”, Mechanics of Advanced Materials and Structures, 16(2), pp.83-97 (EI, SCI) (NSC94-2211-E-009-011)
  62. C. S. Huang* and A. W. Leissa, 2009, “Vibration analysis of rectangular plates with side cracks via the Ritz method”, Journal of Sound and Vibration, 323, pp.974-988. (EI, SCI)
  63. C. S. Huang*, S. L. Hung, W. C. Su, and C. L. Wu., 2009, “Identification of time-variant modal parameters using TVARX and low-order polynomial function”, Computer-Aided Civil and Infrastructure Engineering, 24(7), pp.470-491.(EI, SCI) (NSC 94-2625-Z-009-006).
  64. C. S. Huang*, A. W. Leissa, and R. S. Li, 2011, “Accurate vibration analysis of thick, cracked rectangular plates”, Journal of Sound and Vibration, 330, pp. 2079-2093. (EI, SCI)
  65. C. S. Huang*, O. G. McGee, M. J. Chang, 2011, “Vibrations of cracked rectangular FGM thick plates”, Composite Structures, 93(7), pp.1747-1764. (EI, SCI)
  66. C. S. Huang*, A. W. Leissa, and C. W. Chan, 2011, “Vibrations of rectangular plates with internal cracks or slits”, International Journal of Mechanical Science, 53, 436-445. (EI, SCI)
  67. C. S. Huang* and C. N. Hu, 2011, ‘Geometrically induced stress singularities in a piezoelectric body of revolution”, Computers & Structures, 89, pp.1681-1696. (EI, SCI)
  68. W. C. Su, C. S. Huang*, S. L. Hung, L. J. Chen, and W. J. Lin, 2012, “Locating damaged storeys in a shear building based on its sub-structural natural frequencies”, Engineering Structures 39, pp.126-138. (EI, SCI)
  69. T. H. Lin, S. L. Hung*, C. S. Huang, and T. K. Lin, 2012, “Detection of damage location using a novel substructure-based frequency response function approach with a wireless sensing system”, International Journal of Structural Stability and Dynamics 12(4), pp. 1-24 (EI, SCI)
  70. C. S. Huang*, P. J. Yang and M. J. Chang, 2012, “Three-dimensional vibrations of functionally graded material cracked rectangular plates with through internal cracks’, Composite Structures, 94(9), pp.2764-2776. (EI, SCI)
  71. C. S. Huang, O. G. McGee*, K. P. Wang, 2013, “Three-dimensional vibrations of cracked rectangular parallelepipeds of functionally graded material”, International Journal of Mechanical Science 70, pp. 1-25 (EI, SCI)
  72. C. S. Huang* and C. N. Hu, 2013, “Three-dimensional analyses of stress singularities at the vertex of a piezoelectric wedge”, Applied Mathematical Modelling 37, pp.4517-4537 (EI, SCI)
  73. S. N. Chou*, F. P. Cheng and C. S. Huang, 2013, “Tip-off effect analysis of a vehicle moving along an inclined guideway by considering dynamic interactions’, Journal of the Chinese Institute of Engineers 36(2), pp. 164-172 (EI, SCI)
  74. C. S. Huang* and C. N. Hu, 2013, “Singularity analysis for a magneto-electro-elastic body of revolution”, Composite Structures 100, pp. 55-70.
  75. S. N. Chou, F. P. Cheng and C. S. Huang*, 2013, “Dynamic analyses of a flexible vehicle moving along a flexible guideway with considering tip-off effect”, International Journal of Structural Stability and Dynamics, 13(1), pp (EI, SCI)
  76. W. C. Su*, C. S. Huang and C. Y. Liu, 2014, “Modal identification of structures from seismic response data via amplitude-dependent time series model”, Applied Mechanics and Materials, 479-480, pp. 1155-1159. (EI)
  77. W. C. Su, C. Y. Liu and C. S. Huang*, 2014, “Identification of instantaneous modal parameter of time varying system via a wavelet-based approach and its application”, Computer-Aided Civil and Infrastructure Engineering, 29(4), pp. 279-298. (EI, SCI)
  78. C. S. Huang* and C. W. Chan, 2014, “Vibration analyses of cracked plates by the Ritz method with moving least-squares interpolation functions”, International Journal of Structural Stability and Dynamics, 14(2), pp (DOI:10.1142/S0219455413500600) (EI, SCI)
  79. C. S. Huang, C. N. Hu, C. C. Lee and M. J. Chang*, 2014, “Stress singularities in an anisotropic body of revolution”, International Journal of Solids and Structures, 51(10), pp. 2000-2011 (EI, SCI)
  80. W. C. Su*, C. S. Huang, C. Y. Liu and Q. T. Le, 2014, “Identification of modal parameter of nonlinear system from seismic response data using amplitude-dependent time series model”, Journal of Vibroengineering, 16(4), pp. 1812-1820. (EI, SCI)
  81. C. S. Huang* and C. N. Hu, 2014, “Geometrically-induced singularities in functionally graded magneto-electro-elastic wedges", International Journal of Mechanical Science, 89, pp. 242-255. (EI, SCI)
  82. W. C. Su, C. S. Huang*, C. H. Chen, C. Y. Liu, H. C. Huang and Q. T. Le, 2014, “Identifying the modal parameters of a structure from ambient vibration data via the stationary wavelet packet”, Computer-Aided Civil and Infrastructure Engineering, 29(10), pp. 738-757. (EI, SCI)
  83. C. S. Huang, L. J. Chen, S. L. Hung, C. T. Ding and W. C. Su*, 2015, “Combining subspace approach and short time Fourier analysis for locating structural damage storeys”, Journal of Vibroengineering, 17(5), pp. 2480-2490. (EI, SCI)
  84. C. S. Huang*, C. Y. Liu and W. C. Su, 2016, “Application of Cauchy wavelet transformation to identify time-variant modal parameters of structures”, Mechanical Systems and Signal Processing, 80(1), pp. 302-323. (EI, SCI) Dec.
  85. H. C. Zeng, C. S. Huang*, A. W. Leissa and M. J. Chang, 2016, ”Vibrations and stability of a loaded side-cracked rectangular plate via the MLS-Ritz method”, Thin-Walled Structures, 106, pp.459-470. (EI, SCI) Sept.
  86. C. S. Huang* and Y. J. Lin, 2016, “Fourier series solutions for vibrations of a rectangular plate with a straight through crack”, Applied Mathematical Modelling, 40(23-24), pp. 10389-10403. (EI, SCI)
  87. Q. T. Le, C. S. Huang and W. C. Su*, 2016, “Application of damage locating vectors approach on monitoring shock isolation system”, MATEC Web of Conferences 71, 04006 (EI)
  88. W. C. Su* and C. S. Huang, 2017, “A study on Gabor frame for estimating instantaneous dynamic characteristics of structures”, Journal of Vibroengineering, 19(1), pp. 447-457 (EI, SCI)
  89. W. C. Su*, C. S. Huang, H. C. Lien and T. Q. Le, 2017, “Identifying the stiffness parameters of a structure using a subspace approach and the Gram–Schmidt process in a wavelet domain”, Advances in Mechanical Engineering, 9(7), pp. 1–13 (SCI, EI)
  90. W. C. Su*, C. S. Huang, 2017, “Identification of structural stiffness parameters via wavelet packet from seismic response”, Procedia Engineering 199, pp. 1032-1037.
  91. W. C. Su*, T. Q. Le, C. S. Huang and P. Y. Lin, 2018, “Locating damaged storeys in a structure based on its identified modal parameters in Cauchy wavelet domain”, Applied Mathematical Modelling 53, pp.674-692. (EI, SCI)
  92. C. S. Huang*, M. C. Lee and M. J. Chang, 2018, “Applications of the MLS-Ritz approach to vibrations and buckling of internally cracked square plates”, International Journal of Structural Stability and Dynamics 18(9), 1850105 (29 pages). DOI:10.1142/S0219455418501055 (EI, SCI)
  93. C. S. Huang*, H. T. Lee, P. Y. Li, K. C. Hu, C. W. Lan and M. J. Chang, , 2019, “Three-dimensional buckling analyses of cracked functionally graded material plates via the MLS-Ritz method”, Thin-Walled Structures 134, pp.189-202. (Jan.)
  94. C. S. Huang*, Q. T. Le, W. C. Su and C. H. Chen, 2020, “Wavelet-based approach of time series model for modal identification of a bridge with incomplete input”, Computer-Aided Civil and Infrastructure Engineering] DOI: 10.1111/mice.12539
會議論文
  1. A. W. Leissa, O. G. McGee, and C. S. Huang, 1994, “Vibrations of Circular plates Having V-Notches or Sharp Radial Cracks,” presented in 12th U. S. National Congress of Applied Mechanics.
  2. 楊永斌、黃炯憲, 1995, "橋梁系統的地震監測研究",高 速公路工程與管理研討會,台北,台灣,pp.551-561。
  3. C. S. Huang, T. T. Teng, C.H. Yeh, and C. H. Cho, 1996, "Transient responses of Circular Arches for Base Excited Motions", Proceedings of 11th World Conference on Earthquake Engineering, Acapulco, Mexico.
  4. 葉錦勳, 盧煉元, 黃炯憲, 鍾立來, 1996,"鋼結構強迫振動試驗實例分析",中華民國第三屆結構工程研討會論 文集(一) , 墾丁,台灣,pp.671-682.
  5. C. S. Huang, Y. P. Tseng, and K. Y. Nieh, 1997, “In-plane vibrations of arches with varying curvature and cross-section”, Proceedings of 1st International Symposium on Vibrations of Continuous System, Estes Park, Colorado, U.S.A. (NSC86-2211-E-032-005)
  6. 李咸亨, 吳志明, 張德文, 黃炯憲, 1997, "黏彈半空間埋設置基礎之動抗阻函數評估", 第七屆大地工程學術研討會. ( NSC85-2621-P-011-002)
  7. C. S. Huang, L. Y. Lu, C. H. Chen, Y. B. Yang, 1998, “Ambient vibration study of a highway bridge”, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering & Construction, Taipei, Taiwan, V1, pp.387-392.
  8. C. H. Chen, C. S. Huang, C. H. Yeh, M. H. Wang, J. J. Bian, H. C. Lin, Y. J. Lee, and S. H. Yang, 1998, “Dynamic responses of pile foundations obtained from forced vibration tests”, ASME, Pressure Vessels and Piping Division (Publication) PVP v364, pp.413-418.
  9. Y. B. Yang, C. H. Chen, C. S. Huang, and L. Y. Lu, 1998, “Dynamic tests of a highway bridge in Taipei”, Asia-Pacific Workshop on Seismic Design & Retrofit of Structures, Taipei, Taiwan, pp. 146-161.
  10. 曾一平,黃炯憲,林佳蓉,1998,"以動力勁度法結合級數解分析 平面變曲率拱",中華民國第四屆結構工程研討會論文集(一) , 台北,台灣,323-332。
  11. C. S. Huang, 2000, ”Modal identification of structures using ARMAV model for ambient vibration measurement”, Proceedings of 12th World Conference on Earthquake Engineering, Auckland, New Zealand.
  12. G. Y. Liu, S. H. Wang , C. S. Huang, Y. K. Yeh, and K. C. Tsai , 2000, “Effectiveness of interior stiffeners on axially loaded concrete-filled square tubular steel columns”, 6th ASCCS Conference on Steel and Concrete Composite Structures, Los Angeles, California, USA.
  13. C. S. Huang, C. H. Loh, S. H. Chang, 2000, “Monitoring and system identification for highway bridges”, Workshop on Research and Monitoring of Long Span Bridges, Hong Kong.
  14. 蔡益超,黃炯憲,曾一平,陳威成,2000,”學校建築結構耐震能 力靜力詳細評估”, 第五屆結構工程研討會,溪頭,南 投,pp.1051-1058。
  15. 翁元滔,王勝輝,黃炯憲,葉勇凱,劉季宇,蔡克銓,2000,”箍 筋式加勁鋼管混凝土柱受軸壓行為之探討”, 第五屆結構工程研討會, 溪頭,南投,pp.1225-1232。
  16. 陳振華,黃炯憲,楊永斌,2000,”預力混凝土橋之現地實驗與動 力特性識別”, 第24屆全國力學會議
  17. Y. T. Weng, G. Y. Liu, C. S. Huang, K. C. Tsai, and Y. K. Yeh, 2000, “Effectiveness of interior stiffeners on axially loaded concrete-filled square tubular steel columns”, Proceddings of 13th KKNN Symposium on Civil Engineering, Taipei, Taiwan, pp. 213-218.
  18. C. S. Huang, S. L. Lin, and S. C. Yeh, 2000, “Application of a subspace method to identify structural characteristics from shaking table tests”, 1st International Conference on Structural Stability and Dynamics, Taipei, Taiwan, pp.519-524.
  19. Y.-K. Yeh, G.-Y. Liu, S.-C, Su, C. S. Huang, W.-L. Sun, and K. C. Tsai, 2001, “Experimental behavior of square concrete-filled steel tubular beam-columns stiffened by interior tie bars”, Proceedings of 1st international conference on Steel & Composite Structures, Pusan, Korea, pp. 1171-1178.
  20. H. T. Hu, C. S. Huang, M. H. Wu, and Y. M. Wu, 2002, “Numerical analysis of concrete-filled steel tubes subjected to axial force”, Proceedings of The Twelfth International Offshore and Polar Engineering Conference, Kitakyushu, Japan, pp. 73-80.
  21. 黃炯憲,聶國昀,2002,”預載重圓拱面內振動之解析解”,第 六屆結構工程研討會,墾丁,台灣。
  22. S. L. Hung, C. S. Huang, and C. M. Wen, 2002, “Neural Network Approach for Parametric Identification of a Building from Seismic Response Data,” Proceedings of the IASTED International Conference, Applied Modeling and Simulation, November 4-6, Cambridge, MA, USA, pp. 300-305.
  23. C. S. Huang, S. L. Hung, and W. C. Su, 2004, “System identification of structures from seismic response data via wavelet packet method”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper No. 2272.
  24. H. T. Hu, Z. L. Chen, and C. S. Huang, 2004, “Nonlinear analysis of CFT subjected to combined avail force and moment”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper No. 2446.
  25. 林俊昌、蔡英宏、黃炯憲、劉俊秀、王維志,2004,”施工作業對 既有半導體廠房微振控制之影響”, 第七屆結構工程研討會,桃 園,台灣。
  26. C. S. Huang, K. Y. Nieh, and M. C. Yang, 2005, “In-plane analysis of vibration and stability of a loaded arch with variable curvature”, Proceedings of 5th International Symposium on Vibrations of Continuous System, Berchtesgaden, Germany.
  27. C. S. Huang and W. C. Su, 2006, “Application of continuous wavelet transformation to the modal identification of a structure,” 10th East Asia-Pacific Conference on Structural Engineering and Construction, Bangkok, Thailand, Paper No. WE_AU_0059.
  28. C. S. Huang and M. J. Chang, 2007, “Vibration of sectorial and skew Mindlin plates with corner stress singularities,” 6th International Symposium on Vibrations of Continuous Systems, Squaw Valley, California.
  29. M. J. Chang and C. S. Huang, 2008, “Investigation of geometrically induced stress singularities in a FGM thick plate,” Cross-Strait Conference on Computational Mechanics, Taipei, Taiwan.
  30. C. S. Huang*, W. C. Su, C. W. Chan, and T. W. Hsu, 2008, “Identification of instantaneous modal parameters of a time varying structure via a neural network,” 14th World Conference on Earthquake Engineering, Beijing, China, Paper No. 05_01_0359.
  31. W. C. Su* and C. S. Huang, 2008, “Identification of modal parameters of a time variant structure via TVARX model,” 11th East Asia-Pacific Conference on Structural Engineering & Construction (EASEC_11) , Taipei, Taiwan.
  32. C. S. Huang*, S. C. Liao, and I. C. Lee, 2009, “Vibration of cantilevered rectangular plates with edge V-notches or slits”, 7th International Symposium on Vibrations of Continuous Systems, Zakopane, Poland.
  33. W. C. Su, C. S. Huang* L. J. Chen, and W. J. Lin, 2010, “Damage diagnosis of a shear building via sub-structural time series”, 5th World Conference on Structural Control and Monitoring, Tokyo, Japan.
  34. 陳連杰、蘇威智、林宛臻、黃炯憲,2010,”以子結構之動態反應 診斷剪力架構之損壞情形”, 第十屆結構工程研討會,桃園,台 灣。
  35. C. S. Huang*, K. P. Wang and P. J. Yang, 2011, “Three dimensional vibration analyses of cracked rectangular FGM plates”, 8th International Symposium on Vibrations of Continuous Systems, Whistler, British Columbia, Canada.
  36. C. S. Huang*, C. Y. Liu, W. C. Su, 2012, “Damage diagnosis of a building via sub-structural TVARX”, 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
  37. W. C. Su*, C. S. Huang, and C. Y. Liu, 2013, “Identification of instantaneous modal parameters of a nonlinear structure via amplitude dependent ARX model”, PSAM Topical Conference in Tokyo-In Light of the Fukushima Dai-Ichi Accident, Tokyo.
  38. C. S. Huang* and C. N. Hu, 2014, “Three-dimensional singularity analysis for a magneto-electro-elastic wedge”, 2014 World Congress on Advances in Civil, Environmental, and Material Research, Busan, Korea.
  39. Q. T. Le, C. S. Huang and W. C. Su, 2014, “Modal identification via continuous Cauchy wavelet transform and ARX model”, The 5th Asia Conference on Earthquake Engineering, October 16-18, Taipei, Taiwan.
  40. W. C. Su*, C. S. Huang and H. C. Lien, 2016, “Identification of instantaneous modal parameters of a nonlinear building via a Gabor-frame-based approach”, 2016 International Conference on Applied System Innovation (ICASI) , Okinawa, Japan.
  41. C. S. Huang* and C. W. Chan, 2016, “Evaluating the stress intensity factors for in-plane crack problems via an element-free method”, 第40屆全國力學會議,新竹,台灣。
  42. C. S. Huang*, C. Y. Liu and W. C. Su, 2017, “Damage assessment of a building under an earthquake via the TVARX model and Bayesian approach”, 16th World Conference on Earthquake Engineering, Santiago, Chile.
  43. C. S. Huang*, Y. C. Fu and P. Y. Li, 2017, “Vibrations of skewed FGM plates with internal cracks via MLS-Ritz Method”, The 2017 World Congress on Advances in Structural Engineering and Mechanics (ASEM17) , Ilsan (Seoul), Korea.
  44. C. S. Huang*, J. W. Lin and W. C. Su, 2018, “Damage assessment of a building via a Bayesian probabilistic approach with earthquake responses”, Proceedings of the Twenty-eighth International Ocean and Polar Engineering Conference Sapporo, Japan.
  45. C. S. Huang*, P. Y. Li and H. T. Lee, 2019, “Applications of the MLS-Ritz method to three-dimensional vibrations of loaded and cracked functionally graded material plates”, Proceedings of the Twenty-second International Conference on Composite Materials, Melbourne, Australia.
專書技術報告
  1. 李咸亨, 黃炯憲, 黃賢統, 1994, "宜蘭農工教學大樓基地土壤彈簧勁度與阻尼比研究(一) " 國科會研究報告NSC83–0410–E–011–003。
  2. 楊永斌,蔡益超,高健章,黃炯憲,盧煉元,"西藏大橋動力及靜力特 性之監測",1994,第一次期中報告,台灣省住都局。
  3. 李咸亨, 張德文, 黃炯憲, 黃賢統, 1995, "宜蘭農工教學大樓基地土壤彈簧勁度與阻尼比研究(二) " 國科會研究報告NSC84–2621–P–011–004–B。
  4. 黃炯憲, 盧煉元, 葉錦勳, 葉公贊, 1995, "宜蘭農工教學大樓之地震資料整理及初步分析- 1994年6月5日" 國家地震工程研究中心報告NCREE–95–002。
  5. 李咸亨, 張德文,黃炯憲, 黃賢統, 1996, "宜蘭農工教學大樓基地土壤彈簧勁度與阻尼比研究(三) " 國科會研究報告NSC85–2621–P–011–002。
  6. 楊永斌,蔡益超,高健章,黃炯憲,盧煉元,"西藏大橋動力及靜力特 性之監測",1996,第二次期中報告,台灣省住都局。
  7. 蔡益超, 黃炯憲,1996,"宜蘭農工教學大樓地震反應分析 (三) " 國科會研究報告NSC85–2621–P–319–005。
  8. 葉錦勳, 盧煉元, 鍾立來, 黃炯憲, 1996,"裝置隔震、消能元件之鋼結構強迫振動試驗—含空構架及裝置加勁阻尼器" 國家地震工程研究中心報告NCREE–96–003。
  9. 黃炯憲, 葉錦勳, 林憲忠, 葉公贊, 1996, "隨機遞減法在微震量測之應用—比例阻尼系統〞國家地震工程研究中心報告NCREE–96–013。
  10. C. S. Huang,1997, “In-plane transient responses of a circular arch by Laplace transform”, Report of National Center for Research on Earthquake Engineering, NCREE–97–004。
  11. 曾一平, 黃炯憲, 1997,”以動力勁度法結合級數解分析平面變曲率拱” 國科會研究報告NSC86–2211–E–032–005。
  12. 李咸亨, 黃炯憲, 黃賢統, 1997, "宜蘭農工教學大樓基地土壤彈簧勁度與阻尼比研究(四) " 國科會研究報告NSC86–2621–P–011–001。
  13. 黃炯憲, 葉錦勳, 卞志堅, 王明輝, 林憲忠, 1997, “高鐵橋梁基礎基樁動力試驗”, 國家地震工程研究中心報告NCREE–97–008。
  14. 曾一平,黃炯憲,1998,"變斷面變曲率曲梁結構面外動力分 析",國科會研究報告NSC87–2211–E–032–005。
  15. 黃炯憲,1998,"隨機遞減法應用至非古典阻尼線性系統微動量測 之理論探討",國家地震工程研究中心報告NCREE–98–003。
  16. 羅俊雄,鍾立來,鄧崇任,黃炯憲,柴駿甫,劉季宇,廖文 義,1998,"嘉義瑞里地震勘災初步報告",國家地震工程研究中心報告NCREE– 98–004。
  17. 黃炯憲,鍾立來,葉勇凱,葉錦勳,盧煉元,劉季宇,1998,”鋼 管混凝土構材研究之回顧” ,國家地震工程研究中心報告NCREE–98–012。
  18. 黃炯憲,葉勇凱,劉季宇,蔡克銓,王勝輝,1999,”加勁鋼管混 凝土柱受軸壓行為之探討(一)”,國家地震工程研究中心報告NCREE– 99–012。
  19. 黃炯憲,1999,”微動量測分析工具探討 (二) ? 時間序列法”,國家地震工程研究中心報告NCREE–99–018。
  20. 羅俊雄,鍾立來,黃炯憲,鄧崇任,葉錦勳,張順益,簡文郁,柴駿 甫,劉季宇,廖文義 ,1999," 集集地震勘災初步報告",國家地震工程研究中心報告NCREE–99–027。
  21. 羅俊雄,蔡益超,楊永斌,張國鎮,陳正興,莫詒隆,田堯彰,陳振川,李洋傑,黃 炯憲,1999,“中山高速公路汐止五股高架拓寬工程圓山段橋梁及北二高 碧潭橋監測系統之後續研究計畫”,第一次期中報告,交通部台灣區國道高速公路局。
  22. 楊永斌,蔡益超,高健章,黃炯憲,盧煉元,"西藏大橋動力及靜力特 性之監測",1999,期末報告,台灣省住都局。
  23. 劉季宇,葉勇凱,黃炯憲,蔡克銓,孫維隆, 2000,”方形加勁鋼管混凝土柱受軸壓與彎矩之行為研究”,國家地震工程中心研究報告NCREE –00– 008。
  24. 胡宣德,黃炯憲,吳明憲, 2000,”加勁鋼管混凝土構材受軸力行為之數值分析”,國家地震工程中心研究報告NCREE –00– 031。
  25. 羅俊雄,蔡益超,楊永斌,張國鎮,陳正興,莫詒隆,田堯彰,陳振川,李洋傑,黃 炯憲,2000,“中山高速公路汐止五股高架拓寬工程圓山段橋梁及北二高 碧潭橋監測系統之後續研究計畫”,第二次期中報告,交通部台灣區國道高速公路局。
  26. 黃炯憲,洪士林,賴俊明,?宗廷,陳承俊,2001,”應用類神經 網路於橋樑實測地震反應之模態識別”,中央氣象局委託研究計畫結案報告。
  27. 黃炯憲,葉勇凱,劉柏村,2002,” 高強度加勁鋼管混凝土梁柱行為探討”,國家地震工程中心研究報告NCREE –02–027。
  28. 羅俊雄,蔡益超,楊永斌,張國鎮,陳正興,莫詒隆,田堯彰,陳振川,李洋傑,黃 炯憲,2002,“中山高速公路汐止五股高架拓寬工程圓山段橋梁及北二高 碧潭橋監測系統之後續研究計畫”,期末報告,交通部台灣區國道高速公路局。
  29. 洪士林、黃炯憲、黎明璟、溫俊明,2002,”應用小波神經網路於 橋樑實測地震反應之損壞偵測”,中央氣象局委託計畫成果報告。
  30. 黃炯憲、洪士林、蘇威智,2003,”利用小波包識別橋樑動態特 性”,中央氣象局委託計畫成果報告。
研究成果智慧財產權及其應用成果
  1. 黃炯憲、王勝輝、葉勇凱、劉季宇,2001,鋼管填充混凝土柱角隅 加勁裝置, 中華民國發明專利號:新型175636號,國科會計畫編號:NSC88-2711-3-319


最後更新日期: Fri, 2020-07-10 05:58 PM

<< 更多師資
地址:新竹市大學路1001號工程二館土木工程系 電話:886-3-5713827 傳真:886-3-5716257 
Department of Civil Engineering in National Chiao Tung University