Terry Y.P. Yuen

袁宇秉 助理教授

最高學歷: 香港科技大學土木及環境工程學系 博士

研究專長:地震工程、高層建築物, 混凝土及磚石結構, 非線性固體力學, 結構在災後的恢復能力

教授課目:材料力學, 結構學, 混凝土結構設計, 預力混凝土設計, 高層建築物設計, 混凝土建築的防震設計


電話:03-5712121 ext: 54905

電子信箱: terryyyp@nctu.edu.tw

研究室網頁: https://ssris.nctu.edu.tw/


2017/8~迄今 國立交通大學土木工程系助理教授


  1. Actively Seeking Excellent Young Scholars Overseas Scholarship Award presented by The Foundation for the Advancement of Outstanding Scholarship (FAOS) - 「財團法人傑出人才發展基金會」之「積極爭取國外優秀年輕學者獎助」 (2018).
  2. MOST Young Scholar Fellowship presented by the Prof. Chen Liang-gee- Minister of Science and Technology of Taiwan in the MOST Young Scholar Fellowship Investiture Ceremony on 17th October 2018.
  3. NCTU's Wen Liang Hsu Junior Chair Professor (許文良青年講座教授) presented by the Prof. Mau-Chung Frank Chang - President of National Chiao Tung University (2017).
  4. The Grand Structural Excellence Award (R&D) 2017, presented by The Joint Structural Division of the Hong Kong Institution of Engineers and the Institution of Structural Engineers, UK (details of the award were presented in Media, including Sing Tao Daily and Hong Kong Economic Times on 12th May 2017).
  5. The HKIE Best Transactions Prize 2016, presented by Ir J K H CHOI - the President of The Hong Kong Institution of Engineers (HKIE) in the HKIE Presidential Address/Dinner on 26th August 2016.
  6. The Most Respected Lecturer 2015 in the School of Engineering at the Bursa Orhangazi University.
  7. The Telford Premium 2014, presented by Mr. Geoff French - the President of The Institution of Civil Engineers (ICE) UK at the Award ceremony held in ICE headquarters in London on 17th October 2014
  8. TheHong Kong University of Science and Technology Academic Achievement Medal- the highest academic honour, Presented by the President of the University at the Graduation Ceremony (2008)


  1. Ministry of Science and Technology (MOST) - Einstein Program (科技部-愛因斯坦培植計畫) “Complete Solutions for Rehabilitation of Seismically Damaged Masonry Structures: Collapse Risk Mitigation using Integrated System of Fiber Reinforced Cementitious Composite/Matrix Overlay and Optical Fiber Sensor Monitoring”, Project Numbers 107-2636-E-009 -002 - & 108-2636-E-009-005-, Principal Investigator. 2.2018-1.2021.
  2. NCTU - Junior Faculty Research Enhancement Project (交大增能計畫) “Enhancing the Seismic Performance and Resilience of Buildings with Unreinforced Masonry Panels using Fiber-reinforced Cementitious Composites” , Principal Investigator. 1.2018-12.2018.
  3. NCTU - International Research Collaboration Enhancement Project (交大深化國際研究合作計畫) “Smart Disaster Mitigation and Monitoring” , Co-Investigator. 1.2018-12.2018.
  4. Engineering and Physical Sciences Research Council (EPSRC) - Global Challenges Research Fund (GCRF) “Investigation on Using Strain Hardening Fibre Reinforced Cementitious Matrix from Polymer Fibre and Natural Fibre for Seismic Retrofit of Masonry Structures”, Co-Investigator. In partnership with the Brunel University London UK and Nazarbayev University Kazakhstan. 7.2016-7.2017.
  5. The Scientific and Technological Research Council of Turkey (TÜBİTAK) -“Nonlinear Multi-scale Modelling and Seismic Vulnerability Analysis of Infilled Frame Structures”, Project Number 214M236, Principal Investigator. 4.2015-8.2016.
  6. BOU-BAP - “Impact Behaviour of Fibre-reinforced Self-compacting Concrete Slabs (Farklı Lif Oranlarına Sahip Kendiliğinden Yerleşen Betonda Çarpma Etkisi)”, Principal Investigator. 9.2015-8.2016.
  7. The Hong Kong Research Grants Council (HK-RGC) - “Modelling and Seismic Analysis of Infilled RC Frame Structures”, Grant Number 614011, Research Associate. 9.2011-2.2015.


  1. Liu Y, Kuang JS*, Yuen TYP (2020). Modal-based ground motion selection procedure for nonlinear response time history analysis of high-rise buildings. Earthquake Engineering and Structural Dynamics, 49, 95-110.
  2. Yuen TYP*, Tsai CA, Deb T, Lin YH, Nyienyi J, Wan KT, Huang Q (2020). Large structural shear deformation and failure monitoring using bend losses in polymer optical fibre. Sensors, 20(1), 195.
  3. Yuen TYP*, Deb Trissa, Zhang Hanhui, Liu Yang (2019). A fracture energy based damage-plasticity interfacial constitutive law for discrete finite element modelling of masonry structures. Computers & Structures, 220, 92-113.
  4. Yuen TYP, Zhang H*, Kuang JS, Huang Q (2018). Shake table tests on RC frame infilled by slitted masonry panels. Bulletin of Earthquake Engineering, 16(9) , 4027-4052.
  5. Wan KT*, Zhu H, Yuen TYP, Chen B, Hu C, Leung CKY, Kuang JS (2018). Development of low drying shrinkage foamed concrete and hygro-mechanical finite element model for prefabricated building fasçade applications. Construction and Building Materials, 165, 939-957.
  6. Zhang H, Kuang JS, Yuen TYP*. Low Seismic Damage Strategies for Infilled RC Frames: Shake-table Tests. Earthquake Engineering and Structural Dynamics, 46(14), 2418-2438.
  7. Yuen TYP*, Kuang JS (2017). Revisiting the effect of axial force ratio on the seismic behavior of RC building columns. Structural Engineering International – IABSE, 27(1), 88-100.
  8. Kantar E, Yuen TYP*, Kobya V, Kuang JS (2017). Impact dynamics and energy dissipation capacity of fibre-reinforced self-compacting concrete plates. Construction and Building Materials, 138, 383-397.
  9. Yuen TYP*, Kuang JS, Ho DYB. Ductility design of RC columns. Part 2 – extent of critical zone and confinement reinforcement. HKIE Transactions, 24(1), 42-53.
  10. Yuen TYP*, Kuang JS, Ali BSM (2016). Assessing the effect of bi-directional loading on nonlinear static and dynamic behaviour of masonry-infilled frames with openings. Bulletin of Earthquake Engineering, 14(6), 1721-1755.
  11. Yuen TYP, Kuang JS* (2016). Seismic performance and lateral stability of RC frames with vertical irregular infill arrangements. International Journal of Structural Stability and Dynamics, 16(10), 1750025.
  12. Yuen TYP*, Kuang JS, Ho DYB (2016). Ductility design of RC columns. Part 1: consideration of axial compression ratio. HKIE Transactions, 23(4), 230-244.
  13. Ali BSM*, Yuen TYP, Saber M (2016). Creep evaluation of traditional and nuclear power plants high temperature components, using small pin loaded one-bar and two-bar specimens. Nuclear Technology, 196(1), 130-140.
  14. Yuen YP*, Kuang JS (2015). Nonlinear seismic responses and lateral force transfer mechanisms of RC frames with different infill configurations. Engineering Structures, 91, 125-140.
  15. Yuen YP*, Kuang JS (2015). Axial compression effect on ductility design of RC walls. Structures and Buildings, ICE, 168(8), 489-504.
  16. Kuang JS*, Yuen YP (2015). Ductility design of reinforced concrete shear walls with consideration of axial compression ratio. HKIE Transactions, 22(3), 123-133.
  17. Yuen YP, Kuang JS* (2014). Masonry-infilled RC frames subjected to combined in-plane and out-of-plane loading. International Journal of Structural Stability and Dynamics, 14(2), 1350066.
  18. Yuen YP, Kuang JS* (2013). Fourier-based incremental homogenisation of coupled unilateral damage-plasticity model for masonry structures. International Journal of Solids and Structures, 50(21-22), 3361-3374.
  19. Kuang JS*, Yuen YP (2013). Simulations of masonry-infilled RC frames failure. Engineering and Computational Mechanics, ICE, 166 (4), 179-193.
  1. Deb T, Yuen TYP, Zhang H, Liu Y. “Damage-Plasticity Interfacial Constitutive Law for Discrete Finite Element Modelling of Masonry Structures”, Asian Pacific Congress on Computational Mechanics (APCOM-2019), Taipei Convention Centre, Taipei, Taiwan, December 18-21, 2019.
  2. Yuen TYP, Deb T, CHEN WW, WANG KM, CHEN YC, TSAI CA. A Coupled Damage-Plasticity Traction-Separation Law for Masonry. 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Potsdam, Germany, 27 – 29 August 2019.
  3. Yuen TYP, Wan KT, Zhu H, Chen WW, Wang KM, Chen YC, Tsai CA. Development of Hygro-Mechanical Finite Element Model for Shrinkage Simulation of Prefabricated Building Facades. 17th Int. Conf. on Computing in Civil and Building Engineering, Tampere, 5 – 7 June 2018.
  4. Yuen YP, Kuang JS, Kobya V. Influence of Axial Compression Ratio on Drift Capacity of RC Columns. 16th World Conference on Earthquake Engineering, Santiago, Chile, 9-13 January 2017.
  5. Yuen YP, Kuang JS, Ko MWL. Incremental Homogenisation Strategy for Masonry Composites. 16th International Conference on Computing in Civil and Building Engineering, Osaka, Japan, 6-8 July 2016.
  6. Kobya V, Kantar E, Yuen TYP, Karakuzu K. Rheological and mechanical properties of self-compacting concrete with different fibre content. 1st International Conference on Engineering Technology and Applied Sciences, Afyon Kocatepe University, Turkey, 21-22 April 2016.
  7. Ko MWL, Leung CKS, Yuen TYP. Automated segmentation of optic nerve head for the topological assessment. 2016 Global Medical Engineering Physics Exchanges/Pan American Health Care Exchanges (Gmepe / Pahce), Madrid, Sprain, 4-9 April 2016.
  8. Yuen TYP, Kuang JS, Suen PC, Pang TC. Effects of Infill Walls Configuration on Seismic Behaviour and Failure Mechanisms of RC Frame Structures. 11th Sino-Japanese Forum on Structural Engineering, Wuhan, China, 24-25 October 2015.
  9. Yuen YP, Kuang JS. Effect of openings on nonlinear dynamic responses of masonry infilled RC frames. 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Crete Island, Greece, 25–27 May 2015.
  10. Yuen YP, Kuang JS. Axial compression effect on ductility design of rc structural walls. Second European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, 24 -29 August 2014.
  11. Kuang JS, Yuen YP. Soft-storey behaviour of irregularly infilled RC frames under seismic effects. Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics, Vienna, Austria, 28-30 August 2013.
  12. Yuen YP, Kuang JS. Effect of out-of-plane loading on lateral force transfer mechanisms of infilled RC frames. 14th Int. Conf. on Computing in Civil and Building Engineering, Moscow, Russia, 27 – 29 June 2012.
  13. Yuen YP, Kuang JS. Nonlinear response and failure mechanism of infilled RC frame structures under biaxial seismic excitation. 15th World Conference on Earthquake Engineering, Lisbon, Portugal, 24 – 28 September 2012, paper 1342.
  14. Kuang JS, Yuen YP. Seismic Performance of vertically irregular infilled RC frames: computational simulations. 2nd International Conference on Computational Design in Engineering, Jeju, Korea, 13 – 16 December 2012.
  15. Kuang JS, Yuen YP. Nonlinear performance and damage mechanisms of infilled RC frames under interacting two-plane seismic excitations. 10th Cross Strait Two Coasts and Four and Places Engineers (Hong Kong) Forum, Hong Kong.
  16. Yuen YP, Kuang JS. Seismic failure of infilled RC frames: discrete modelling approach with damage-based cohesive crack representation. 3rd International Symposium on Computational Mechanics, Taipei, Taiwan, 5 – 7 December 2011.
  17. Yuen YP, Kuang JS. Seismic performance and vulnerabilities of infilled RC frame structures. 24th KKCNN Symposium on Civil Engineering, Hyogo, Japan, 14-16 December 2011.
  18. Kuang JS, Yuen YP. Effect of out-of-plane loading on in-plane behaviour of unreinforced infilled RC frames. 13th Int. Conf. on Computing in Civil and Building Engineering, Nottingham, UK, 20 June – 2 July 2010.
  1. “A Damage-Plasticity Interfacial Constitutive Law for Nonlinear Discrete-Finite Element Modelling of Masonry Structures”, University of Tohoku, Sendai, Japan (12.2019).
  2. “Constitutive modelling of quasi-brittle materials and applications to nonlinear structural analysis”, National Taiwan University, Taiwan (11.2019).
  3. “Smart and Resilient Infrastructure and Building Engineerings”, National Yunlin University of Science and Technology, Taiwan (10.2019).
  4. “Optical Fibre Sensing with v-OTDR for Structural Deformation and Failure Monitoring”, National Research Council (NRC)-MOST Taiwan Workshop, Ottawa, Canada (10.2019).
  5. “Assessing the effect of bi-directional loading on nonlinear dynamic behaviour of masonry-infilled frames”, Huaqiao University, China (04.2017).
  6. “Design of RC Shear Walls to HKConcrete2013: Consideration of Axial Compression Ratio”, (01.2014), HKIE Headquarters.
  7. “Design of RC Columns to HKConcrete2013: Consideration of Axial Compression Ratio and Confinement Detailing”, (02.2014), HKIE Headquarters.
  8. “Seismic Performance and Design Considerations of Infilled RC Frames”, (12.2012), HKIE Headquarters.

最後更新日期: SUN, 2020-01-12 11:14 PM

<< 更多師資
地址:新竹市大學路1001號工程二館土木工程系  電話:886-3-5713827 傳真:886-3-5716257 
Department of Civil Engineering in National Chiao Tung University
Department of Civil Engineering in National Chiao Tung University